CM685V-W User Manual
71
www.comset.com.au
functionality. Allow list: only the MAC address in the list is allowed to forward. Deny list: all
packet is allowed to forward except MAC address in the list.
MAC-List
: Click button
to delete a MAC address from list, click button
to add a new
MAC address to the list.
3.6.6.4 WiFi AP client
Steps 1)
Click the button “AP Client” on the wireless overview page, then the system will start to
scan all WiFi signals.
Step 2)
If the WiFi you want to join is on the list, click the button “Join Network” accordingly. If it
is not, click “Repeat Scan” until you find the WiFi that you want to join.
Step 3)
Join Network Settings
Replace wireless configuration: An additional wireless network will be created if it is unchecked.
Otherwise it will replace the old configuration.
WPA passphrase: Specify the secret encryption key here.
Name of the new network: The default value is ‘wwan’. Please change it if it conflicts with other
interfaces.
Step 4)
Click ‘Submit’ if everything is configured. The below is the Wi-Fi configuration page.
Don’t change the operating frequency. Make sure the ESSID and BSSID are for the Wi-Fi you
want to join.
