Put Comrex On The Line.
Toll Free in USA: 800-237-1776 • www.comrex.com
e-mail: [email protected]
19 Pine Road, Devens, MA 01434 USA
Tel: +1-978-784-1776 • Fax: +1-978-784-1717
Press Enter in the Main Status Display.
Press “4” for Configure.
Then “1” for Pgm Qdial (Program Quick Dial).
The screen will display “Enter Qdial #01-19.” Enter in 01.
Then key in the number to dial, including any country, area or other codes you wish (up to 44 digits). To insert
a two second pause, press the Qdial key. A comma will appear to indicate the pause. Multiple pauses may
be inserted. The Cancel key backspaces for corrections.
When the number is entered in correctly, press the Enter key. Pressing the Hangup key will exit this menu
without saving your entry.
Step 4
STL Backup Mode is engaged from the Hidden Menu. To access the Hidden Menu:
From the Main Status Display, press the Hangup key 3 times.
Press “4” for More.
Select “1” for STL.
“1” to Enable STL Mode. “Selection Stored” will appear briefly.
Press the Cancel key twice.
The display will now read “STL Ready to Dial.”
Next, close pins 1 and 5 on the Multipurpose Port, and the BlueBox will start dialing the number in Qdial 01.
Note: While in this mode the BlueBox will only initiate the call when pins 1 and 5 are closed or tied together.
Step 5
There are two ways to disengage STL Backup Mode:
Open pins 1 and 5 on the Multipurpose Port so the unit will drop the call and not try to redial, and then press
the Cancel key to exit.
Press the Hangup key to end the call. The BlueBox will automatically exit and return to the Main Status
Display.
.
