Pearl
– installation instructions
Electronic push button cabinet lock
Pearl
—
Installation
instructions:
KEYPAD version
7
KEYPAD version
Single Use Mode
allows for a revolving
user code so multiple people may use
the lock without having to reprogram
the Pearl each time.
Standard Mode
operates with a fixed
code. To change the code, follow the
Changing the User Code
steps on
page 5.
To change the Pearl to Single Use or
Standard Mode, follow the steps on
page 5 to enter programming mode.
There is a
10
second programming time
limit between each step. If Pearl times
out or an error is made, programming
will end and you will need to enter
programming mode again.
1. Place Pearl into programming
mode (see page 5).
a. To turn Single Use Mode
“ON”: type
51
and then
press
(enter).
OR
b. To return to Standard
Mode: type
50
and
then press
(enter).
2. If successful, the
green
indicator
light will illuminate for 1 second.
Note: Returning to Standard Mode
will reset the factory user default
code (
1234
).
Continue programming or press
9
and
then
(enter) to exit programming.
CompX Pearl features several modes of operation. These functions can be
changed using the following instructions with a valid supervisor code.
Programming Single Use Mode / Standard Mode
