Computime AEP 3081, Instruction Manual

Page: 15 / 15

15
ETL DECLARATION
This device must be connected to an ETL/UL Approved 5V DC adapter provided by manufacturer.
Conditions for operating this device:
Location of Usage Indoor and dry location
Operating Voltage of Adapter 90 V to 260 V AC
Operating Temperature 5
o
C to 40
o
C
Relative Humidity Max. 90% RH non-condense
Altitude Up to 2000 m
Pollution Degree 2
For installation, please refer to the installation section of this manual.
Place the device on a flat surface without any blockage so power can be easily disconnected.
This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, second edition, Including
Amendment 1, or a later version of the same standard incorporating the same level of testing requirements.
WARNING: If the equipment is used in a manner not specified by manufacturer, the protection provided by
the equipment may be impaired.