5. NOTICES
1.
Protect the device from falling down from high altitudes and from shock.
2.
Low battery voltage can alter/reduce the sensitivity of the device. Replace the batteries if low battery
voltage is indicated.
3.
Turn on the device in clean air. If you turn it on in an environment with high gas concentration, then
the device can indicate fault. In such cases, turn the device off and turn it on again in clean air.
4.
Do not store the device in an environment with caustic or volatile gases.
5.
Protect the device from external damages, since such damages can distort the result of measurement.
6.
Please operate the device according to the above instructions.
6. TECHNICAL DATA
• Detectable gases:
natural gas, autogas (LPG)
• Measurement range:
Natural gas: 1000ppm - 6500ppm
Autogas (LPG): 500ppm - 6500ppm
• Working conditions:
from -20°C to +55°C, with relative humidity lower than 95%
• Battery voltage:
3V DC (2 x 1.5V
alkaline batteries
(LR6 type; AA size))
• Working current:
200mA
• Response time:
less than 5 seconds
• Alarm method:
acoustic and light signals
• Alarm sound volume:
at least 65dB
The
COMPUTHERM
HT-3000
type gas leak detector
complies with the requirements of standards EU EMC 2004/108/EC.
Manufacturer:
QUANTRAX Kft.
Fülemüle u. 34., Szeged, H-6726, Hungary
Tel: +36 62 424 133 • Fax: +36 62 424 672
Email: [email protected]
Web: www.quantrax.hu • www.computherm-hungary.hu
