EVENT
LEDS
LED
DURATION
REMOTE
CHIRPS
Runtime Remaining: 100%
Once Every
5 Seconds
6 Times
Runtime Remaining: 75%
N/A
Runtime Remaining: 50%
Runtime Remaining: 25%.
All Command Confirmations
1 or 2
1 or 2
All Error Confirmations
3 Times
3 Times
Arming/Locking While Trigger
is Open
PARKING LIGHT FLASHES
REMOTE START ERROR
3 then 1
1: Motor running
3 then 2
2: Key in ignition on position
3 then 3
3: Door open
(manual transmission only)
3 then 4
4: Trunk open
3 then 5
5: Foot brake on
3 then 6
6: Hood open
3 then 7
3 then 8
7: Reservation off
(manual transmission only)
8: Tach or voltage sensing failure
3 then 9
9: FT-DAS sensor shutdown
3 then 10
10: System is in Valet Mode
START ERROR CODES
LEDS
Download full user manuals
at compustar.com/user-manuals.
UM-FT-2W4B-LED _QuickCard 170913.indd 2
2017/9/13 19:37:22
Valet Mode: If your remote start is not working, you may be in Valet Mode.
Your parking lights will also not flash. Your doors will still lock and unlock. To
exit Valet Mode, tap the Lock and Trunk buttons or turn the Ignition On and
then tap the foot brake 10 times or reprogram your remote(s).
To reprogram your remote first cycle the key in the ignition 5 times within
10
seconds. Parking lights will flash. After that tap the Lock button on your remote.
Repeat for any additional remotes. If you receive two parking light flashes, your
system has exited remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to
5 PM PST. Register online at www.
first
echllc
.com within 10 days of
purchase to activate your new remote’s warranty.
QUICK START CARD
RF-2WG15R-FM
