background image

7          By Firstech, LLC    

By Firstech, LLC            6

General System Functions

The remote transmitter functions have been predetermined and programmed from the factory. The single button configuration allows for keyless entry and/or
remote start functionality. Although other Firstech systems have numerous functions and capabilities, please keep in mind that your system has the option for
future upgradeability to a 2 Way system.

Sending Commands

When in range, and the button has been pressed, the remote bright blue LED will illuminate and vehicle’’s parking lights will flash. For example, to send a
remote start command from the remote, hold the button for at least 3 seconds. The remote’’s bright blue LED will come on solid and then flash.

Upon receiving confirmation that your vehicle is running, the parking lights will light solid. The remote start run time can be programmed for 3, 15, 25, or 45
minutes - ask your local Firstech dealer to adjust Option 2-7 if you would like a run time other than 15 minutes (default). 

IMPORTANT:

The vehicle’’s key must be inserted into the ignition and turned to the <on> position prior to driving your vehicle. If the foot brake is depressed

prior to the key being in the <on> position, the vehicle will shut off.

Tap the button once to lock/arm the system. After you tap the button the doors should lock 1 second later. To unlock/disarm your vehicle tap
the button twice within 1 second. This feature is optional and may require additional programming and/or installation. Please check with your
dealer for details.

aƒ”‰–…@lƒ‹Oa’@Ž„@uŽŒƒ‹Od‰“’

To remote start, hold the button for at least 3 seconds. Repeat to shut your remote start down.

After sending the remote start command, If you see three parking light flashes, there is a remote start error. Refer to the ““remote start error diagnostic”” on the
last page of this manual for details.  

a•””‰ƒ@t’Ž“‰““‰Ž@r…”…@“”’”@f•Žƒ”‰Ž

The optional Anti-Grind/Starter Kill feature prevents you from accidentally grinding your vehicle’’s starter motor when taking over with the key. This feature
requires additional installation and programming. Also your dealer can program a basic security feature that prevents your vehicle from starting when it is
locked/armed. Please see your dealer for more details.

anti@g’‰Ž„@O@s”’”…’@k‰ŒŒ

Summary of Contents for 1BR-AM








Reviews: