CompuStar 2000-AS User's Manual Page 6 of 10
or Remotely. To Exit Timer Mode press buttons Unlock & Stop
simultaneously for ½ second again.
12. Transmitter Learning Procedure
Your transmitter has been programmed at the factory. However, if
you replace or add additional Remote, follow this procedure.
Steps 1:
Put the system in Valet mode with key: Ignition on and off
five times with key within 10 seconds. The parking light will flash
once.
Step 2:
Within 6 seconds, press the button Lock for a half-second.
Step3:
The parking light will flash twice to confirm
Step 2.
Step 4:
Program 2
nd
transmitter or 3
rd
transmitter by pressing any
button. The system will program up to 3 transmitters. The parking
light will flash once to confirm
Step 3.
13. Programming Options with Transmitter
Step 1
. Programming Option 1. Press buttons Lock and Unlock for 2
seconds. Programming Option 2: Press buttons Lock and Start for 2
seconds. The siren will chirp once. Now you are in the programming
mode.
Step 2
. Within 2 seconds, press Stop for the number of times to go
to the option number you want to change. You will hear a chirp and
see the parking lights flash each time you press button Stop.
Step 3
. Wait few seconds. You will hear a number of chirps and see
a number of parking light flashes corresponding the number of the
option you want to change. If the number of chirps or flashes is not
what you wanted, go back to the Step 1.
Step 4
. Press Lock for the factory setting; one chirp and one flash.
Press Unlock for the Option Setting; two chirps and two flashes.
•
If you hear a long chirp, you are going out of the
programming mode. Go back to the step one.
•
If you want to change more options go back to the step I.