Compuprint 9070 plus User Manual Download Page 29

Page: 29 / 165

Message Description

TEAR OFF PAPER

EJECT PAPER

These messages are displayed when the printer receives a paper ejecting
command (

TEAR NO

item has been selected for the tear-off function) but was not

able to execute it, because the paper to be ejected is longer than 18 inch. Tear off
the fanfold paper and then press the

PARK

key to eject the paper.

TEAR OFF PAPER

PARK PAPER

These messages are displayed when the printer has received a paper parking
command but was not able to execute it, because the paper to be parked is
longer than 18 inch. Tear off the fanfold paper and then press the

PARK

key to

park the paper.

UNLOCKED MENU

When the access to the Printer Setups has been unlocked at the power on, the
printer displays this message.

For the error messages see "Error Handling” later in this manual.

Summary of Contents for 9070 plus






































































































































































Search results

Summary of Contents for 9070 plus

Reviews:

Related manuals for 9070 plus

Brands by name

Popular brands

Compuprint 9070 plus, User Manual

Search results

Summary of Contents for 9070 plus

Reviews:

Related manuals for 9070 plus

Brands by name

Popular brands