Options
A78408744-002
63
Problem Solving
The following table will help you to identify and solve problems which may
occur when using the ASF. If the problem is not listed, or if it is not
corrected by any of the methods suggested, contact your supplier for help.
Problem
Cause
Solution
The ASF does not
feed the paper
The paper bin(s) not in
operating position.
Set paper bin(s) to correct
operating position.
The platen movement is not
being transferred to ASF.
Check the ASF mounting and
proper gear contact.
The printer must be set to
ASF mode.
Set the ASF mode, refer to the
manual.
The ASF is out of paper.
Reload the paper bin(s).
There is a paper jam
condition.
Remove the jammed paper and
restack the paper
More than one
sheet of paper
feeds at a time
The paper is not fanned
enough.
Fan the paper and reload paper
stack.
The paper is out of
specifications or damaged
conforming to ASF
standards.
Replace with new paper
according to the ASF standards.
Paper goes a skew
The paper is damaged.
Remove paper from the bin and
replace it with new paper.
The paper is not
stacker ejected
properly
The output paper stacker is
full.
Empty the output paper .
Summary of Contents for 4051 plus
Page 1: ...4051 plus 4056 plus User Manual...
Page 2: ......
