Compupal HS-BT01 Quick Start Manual Download Page 3

1.  Stop using this product immediately if it causes discomfort or pain. When using this 

product, it is recommended that you limit volume to help avoid harm to your ears and 
danger resulting from being unable to hear what is going on around you. 

2.  Keep the device out of extreme heat and humidity. 
3.  Do not use the device near water, such as sinks, bathtubs, swimming pools, washing 

machines, tubs of water, etc. 

4.  Observe all signs and instructions that require an electrical device or radio product to be 

switched off in designated areas, such as petrol/refueling stations, hospitals, blasting 
areas, potentially explosive atmospheres or aircraft. 

5.  The headset has a wireless range of up to 10M, but wireless performance may be affected 

in different operating environment.   

6.  Barriers and other wireless devices may affect the performance of headset. 
7.  Power time may differ depending on personal habits. 
8. 

Please do not rotate the headset until the head band is set / pushed to lowest position.

 

 

PLEASE NOTE

: the information in this quick start guide was correct at the time of publication, 

but some minor changes may have been made late in the product’s development.   
 
 

Structure of Headset 

 

(

图片

A.  Volume up/down button 
B.  Blue LED (Power indication and pairing indication) 
C.  Red LED (Battery charge indication and low-voltage indication) 
D. 

Ф

6mm Omni-directional microphone 

E.  Multifunction button (Answer call / Hang up / Play/pause / Power on/off / Pairing ) 
F.  Mini USB jack 
G.  Adjustable headband (

用小图标标示

H. 

1M standard USB cable

 

I.  Quick Start Guide 
 

Power On/Power Off 

(图示)

 

A. Power On 
1. If the headset had never been paired any Bluetooth device before, push the multifunction 
button about 

8 seconds 

and the headset will automatically go to the pairing mode, and the 

blue LED will fast twinkle.   
2. If the headset had ever been paired some Bluetooth device before, push the multifunction 
button about 

5 seconds 

to power on and the blue LED will slowly twinkle. The headset will 

automatically search the last paired Bluetooth device for 3 minutes and it will shut down 
automatically without pairing. 
B. Power Off 
1. Push the multifunction button about 5 seconds and the red LED will short flash and go off. 
     
 

Reviews: