Connecting the Monitor
1. Turn off your PC before connecting your LCD monitor to the PC.
2. Take the monitor out from the box and assemble it with the
detachable base.
Note: Make sure to hock the
brace Into the right
position of the base.
3. Take off the plastic cover on the rear bezel of the LCD monitor.
Note: Make sure the surface of the table is clean and covered with a
soft cloth to prevent damaging or scratching the panel when
assembling the LCD monitor.
4. Connect signal cable(s), Audio cable and DC adapter
connector to your Monitor. Make sure the cable heads are
securely connected.
5.
Assemble the plastic cable cover back to the rear cover of the
LCD monitor.
6.
Connect the other end of VGA cable to the VGA port of the PC
system. Make sure the cable head is securely connected.
7. Connect the other end of Audio cable to sound card’s “Audio
out” jack.
8. Plug the female end of the power cord
into the AC adaptor.
9. Connect the male end of the power cord
into a wall socket.
10. Turn on your computer, and then turn on
your LCD Monitor.
