Compucessory CCS15156 User Manual Download Page 3

Troubleshooting 

If your wireless earbuds are not pairing together OR if both earbuds are not flashing 

blue, use the following instructions to reset and re-pair your earbuds: 

1.)  Remove both earbuds from the charging case and turn them OFF by touching both 

earbuds simultaneously until the blue lights slow flashes 3 times. Please note, do 

not cover entire earbuds with your finger or you will not see the blue light flash. 

2.)  Next, touch and hold down both earbuds simultaneously for approximately 13 

seconds, until you see the blue lights quickly flash2 times. You will need to 

continue to hold and see the blue light flash a second time. This resets your 

earbuds.   

3.)  To pair your wireless earbuds, place both earbuds into the changing case, and take 

them out simultaneously;   

4.) 

Make sure the earbuds and your Bluetooth device are next to each other (within 3 feet 
/ 1 meter )

 

5.) 

Turn  on  your  device’s  Bluetooth.  Most  devices  will  automatically  detect  your  earbuds. 

Locate and select 

“CCS15156”

. It will indicate that your earbuds are now connected or 

paired.

 

 

 

If your device does not automatically detect your earbuds, make sure Bluetooth is 

turned on, do a 

SEARCH

 for 

“CCS15156” 

and then click

 CONNECT

 

Notes:

 

 

To shut down, touch theMFB for 4 seconds or place back into the charging case. Once paired, the range is 

approximately 32 feet/10 meters.Your earbud will automatically connect to the last paired and connected device 

when it is turned on again

 

Label: 

 

 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation. 
Any changes or modifications not expressly approved by the party responsible for 
compliance 
could void the user's authority to operate the equipment. 
NOTE: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

Reviews: