Comprod Communications BDA-806870, Customer Instruction Manual

Page: 3 / 15

8 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L
3
Based on the philosophy of Anytime, Anywhere, and Anyplace, the amplifier module 806-869 MHz
is designed for ease of use and being adaptable to various needs in the field. Recently developed
technologies are applied and with the use of modern integrated circuits and RF components, the
Comprod design ensures constant performances and reliable amplifier unit.
Our 800 MHz amplifier has also been designed with government agencies in mind. These are our
highest level of performance and quality for continuous duty solutions while providing maximizing
coverage.
This amplifier module is aimed for the use in buildings, tunnel, government facilities, airports,
providing the communication throughout.
The amplifier module helps to increase the coverage of RF communications in buildings or places
where RF is unable to penetrate from the base station site. The Amplifier Module can be used in both
Uplink and Downlink directions and connected to either a radiant cable, a distributed antenna system
at one end. At the other end it’s connected to the donor antenna.
Main Specifications:
No Parameters Specification Remarks
1 Operating Frequency
DL: 851~869MHz
UL: 806~824MHz
2 Pass Bandwidth 18MHz
3 Passband Ripple ± 1.5dB
4 Signal & Modulation F1D,F2D,LTE
5 Gain 83.5dB
6 Gain variation over Temp. ± 2dB
7
Manual Gain Control
(MGC)
31dB / 1dB step controlled by Rotary switch
8 Automatic Gain Control 30dB
9 Delay 1us max.
10 Input Power No damage 10 dBm
11 Output Power
DL: 31.5 dBm max.
UL: 31.5 dBm max.
12 VSWR 1.5 max
13 Noise figure 2dB max.
Max Gain, without DPLX (2.8
dB max with DPLX
14 Spurious 3GPP TS 36. 106
15 Channel Filter rejection 45dBc@C.F±36MHz Ceramic filter
16 In/Output det. range
Input: -65~-25dBm
Output: 0~+34.5dBm
17 LNA by pass function -20dBm @ input power