4
Installation
Start the computer. Make sure
VideoMate U880
is connected to your computer
and insert the installation CD into your CD drive.
Step 1. After restarting, Windows will detect a new device and start the
Add/Remove Hardware Wizard. Please press
Cancel
and go to the
next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on “setup.exe” on the installation CD.) You can choose
Complete
to install all necessary software (VideoMate U880 drivers,
ComproPVR, ComproDVD, Ulead PhotoExplore 8.5 SE) or choose
Custom
to select item by item. Compro recommends you choose
Complete
.
Step 3. If you see the Windows Logo testing message, below, please press
“Continue Anyway” to proceed.
Step 4. Press
Next
to install ComproPVR, ComproDVD, Ulead PhotoExplorer
8.5 SE.
Step 5. After each program is successfully installed, press
Finish
to proceed.
Step 6. When installation completes, press
Finish
to restart computer.
Step 7. Connect TV signal.
Step 8. Open ComproPVR to enjoy the show.
Continue Anyway
