11
2. Single
Single mode and rest
of the mode are for
user who wants to
have advance settings
like LNB, DiSEqC1.2
motor control and etc.
It also has two other
scanning modes like
“Transponder Scan”
and “Scan the specific
frequency ONLY”.
Transponder Scan
This scanning mode is
for you to specifically
scan a transponder
that you know instead
of scanning the whole
satellite. When
scanning in this mode,
it will add the
channels you have
scanned to your channel list. You will need to know some information on the
transponder that you wish to scan first.
Scan the specific frequency ONLY
This scanning mode will specifically scan a frequency; usually used when the
signal is weak and has been lost during other type of scanning mode.
LNB Settings
This settings need to follow the instruction from the Satellite’s LNB spec. If
you already have other working device that can receive the signal from the
satellite (i.e. Set-Top Box) you may refer the settings for that device. If you still
have problem with LNB settings, please contact your satellite dish provider for
correct information.
DiSEqC1.2 motor control setting
Compro S500 supports DiSEqC 1.2 version. If you have installed motor that
compatible to DiSEqC, it may aim to different satellite to receive different
satellite’s channels.
