1.
Product Description
R1
RJ-45 Jack
Use a CATx cable for connection between two units
R2
HDMI connector
[R2] Connect to an HDMI display
R3
LED Indicator
[R3] Red: Power on / Blue: Link OK
P
Power Supply
Apply power to either one end of two units
2.
LED Indicators
LED Status
Power ON: Green/Link OK: Blue
Power ON: Red/Link OK: Blue
NOTE:
1.
The System will disable the video output signal when it detects non-HDCP compliant
display(s) when playing the HDCP video source.
All the connected output displays
MUST be HDCP compliant, when the video source is HDCP compliant.
2.
The quality of the output signal will depend largely upon the quality of video source,
cable and display device used. Low-quality cables degrade the output signal causing
elevated noise levels. Use the proper cable and make sure the display device can handle
the resolution and refresh rate selected.
P
R1
P
Grounding
R3
R2