Ver1.1 Page 6
5.3 Receiver Front Panel
1. Indicator LED:
Power LED:
illuminates when power has been supplied to the unit.
Link LED:
The connection status indicating lamp.
Illuminate: The Transmitter and Receiver is good connections.
Flashing: The Transmitter and Receiver is poor connections.
Dark: The Transmitter and Receiver is no connections.
HDCP LED:
The HDCP status indicating lamp.
Illuminate: The HDMI signal with HDCP.
Flashing: The HDMI signal without HDCP.
Dark: No HDMI signal.
FW LED:
Light is flashing on behalf of the unit work normally
2. IR IN:
Chanel 1 IR Receiver.
Connect with Wideband IR Rx.
3. IR OUT:
Chanel 2 IR Transmitter. Connect with Wideband IR Tx.
4. RS232 TX/RX:
Connect to the devices (project…etc) that is to be
controlled via 3-pin Relay cable by RS-232 commands.
5. AUDIO OUT:
Connect to speaker via 3.5mm audio cable.
6. USB-D:
Connect to USB peripheral devices such as printer, keyboard,
mouse, flash driver or …etc.
7. USB-H:
Connect from PC or Laptop for data transmit to or control
from the Receiver’s USB-D slots.
8. USB-H/USB-D SELECT:
Select USB host or USB device.
Note: If the unit work to change the state, required again to power
supply.