5.2 Receiver Panel
5 / 8
RS-232
IR OUT
IR IN
HDMI OUT
HDBT IN
DC 24V
ARC LED
Green LED is on when ARC function is turned on.
Name
Function Description
Power LED
Red LED is on when the Receiver is working.
LED is off when the Receiver is on standby.
ARC
USB 2.0
USB 2.0
SERVICE
SWITCH
SPDIF
TX
RX
LAN
SPDIF IN
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
▪ Illuminate: Transmitter
and Receiver are in good connection
status.
▪ Flash: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator lamp
(on the right side of
the HDBT OUT port)
▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI IN
HDMI source input.
IR IN
IR input port for receiving the signal of IR remote.
IR OUT
IR output port for control of source device. This IR output signal
is from IR IN port of the Receiver.
3-pin Phoenix connector for RS232 command transmission,
supporting RS-232 command pass-through between the
Transmitter and Receiver.
L/R OUT
3.5mm stereo connector for analog audio output.
SPDIF OUT
SPDIF connector for optical audio output.
RS-232
LAN
RJ45 connector for connecting Hub or router.