Components Plus,LLC Columbus, WI 53925
Visit us at
11.
Loosen the come-along. Slide the come-along to the far side of the track. Ratchet the come-
along until the linkage lines up with the mounting hole. Insert the bolt and hand tighten the
locknut.
12.
Check to make sure there is ½-3 inches of slack in the track. Linkages of one or more track
pads can be adjusted to obtain this measurement. When you obtain the desired amount of
slack, tighten bolts from the assembly and any adjustment made.
13.
. Release the come-along from the track.
