SYSTEM COMPONENTS
This monitor can be mounted on the dash and can be
mounted on both horizontal and vertical surfaces. Make
sure the view is suitable to the driver to observe the images.
Take care not to block any necessary viewing area when
mounting. Before mounting the system, permanently hook
up all connections to ensure proper operation.
Mounting Monitor
1.
After determining the monitor location, position the
monitor support bracket, mark the bolt hole location, and
then drill the holes. Be careful not to drill into any other
surface that may be hidden.
2.
Attach monitor bracket. Mount the monitor to the
support bracket with supplied 4 angle adjustment screws.
3.
Connect one end of the power cable (wire) to the
proper connections. Connect the other end of the power
cable (plug) to the monitor; connect the monitor and the
camera with the 13-pin system connecting cable.
Camera Connection
Thru-wall Gasket To Seal
Thru Vehicle Exterior
Secondary Waterproof Sleeve
Slides Over Aviation Connection
Waterproof Aviation
Connectors
