Compex WPE54, User Manual, Page: 67 / 137

Chapter 5 Further Configuration
66
4.5.2 How to set up WPA-PSK
[Available in AP/Gateway mode ONLY]
The guidelines below will help you to set up the access point for using WPA-
PSK. Please take note that the
WPA-PSK , WPA2-PSK and WPA-PSK-
AUTO security modes share the same functions).
Security Mode –WPA-PSK, WPA2-PSK, WPA-PSK-AUTO
At the
WLAN Security Setup
page:
Select
WPA-PSK mode.
Click on
Apply button.
Specify the key entry format by
selecting either:
•
Passphrase (Alphanumeric
characters)
•
Hexadecimal
Fill in the pre-shared network
key.
If you are using the Passphrase format, your entry can consist of a minimum of 8
alphanumeric characters or a maximum of 63 alphanumeric characters.
Otherwise, when using the
Hexadecimal format, your entry MUST consist of 64
hexadecimal characters.
The
Cipher Type is set to TKIP .
Define the
GTK update (Group Transient Key update), or the length of time after which the
access point will automatically generate a new master key.