Chapter 2
Let’s Get Going - Hardware Setup
3
2: Let’s Get Going-Hardware Setup
Compex WP54AG can be powered using the standard PoE Injector. This
accessory supplies operational power to the wireless AP via the Ethernet cable
connection. The installation process is described below.
Connect the external antenna to the SMA
connector of Compex WP54AG.
Use an RJ45 Ethernet cable to connect one end of the cable to the Ethernet
socket of the Injector and the other end to one of the LAN ports of Compex
WP54AG.
Warning.
When one port is used for PoE, the other port cannot connect to any other
network device.
Maximum length of the RJ45 Category 5 cable is 100 metres.
