Enter the system
Press the * and # button on the access control keyboard, follow the
4-digit primary password , and then press the # button, the indicator
will flash red , a long tone
Di will be heard, now enter setting
mode.(note:The primary password is 4567.)
“
”
Add user card
Enter the setting mode: Press the button 1
in the mean time a
tone Di will be heard, take
two tone
Di indicates the user card success of user card adding . add other
magnetic cards one by one with a continuous tone Di . With 4
tones Di indicates this card has already been added . After all
user cards setting are completed, press the button * to return to the
setting mode, follow the button * to return to the standby mode.
“ ”
“
”
“
”
“
”
“
”
a magnetic card near the sensor of
Access Control or input the last 6-digital card number .
Note : the system is automatically quitted in 20 seconds of inactivity.
Note:Record the series numbers of these user cards.
Note:
1.all operations can be fulfilled via this wireless keyboard.
2.take the antenna of keyboard vertically aimed at the infrared
area in order to good data transmitting.
Delete user card
Enter the setting mode: Press the button 2
in the mean time a
tone Di will be heard, take
wo tone
Di indicates the success of user card deleting .Delete other user
cards one by one with a continuous voice Di . The 4 tones Di
indicates this card has already been deleted . After all user cards
deleting are completed, press the button * to return to the setting
mode, follow the button * to return to the standby mode.
“ ”
“
”
“
”
“
”
“
”
a magnetic card near the sensor of
Access Control or input the last 6-digital card number. T
Delete all cards
Enter the setting mode. Press the button 9 in the mean time a
tone Di will be heard, follow the button 9
again. then
hearing a continuous tone Di , the tone disappearance indicates
the all user cards are deleted. press the button * to return to
the setting mode, follow the button * to return to the standby mode.
“ ”
“
”
“ ”
“
”
Change the administration password
Enter the setting mode. Press the button 8 in the mean time
a tone
Di will be heard, input the 4-digit new password , then
press the # button. When hearing a tone Di , repeat the new
password and the button # to confirm in the mean time two tones
DiDi will be heard,. If the continuously voice are heard, repeat
again this operation as above till the two tones DiDi is heard.
“ ”
“
”
“
”
“
”
“
”
Operation
3
4
ed
