Access control
instruction manual
*Anti-vandal *metal surface*pickproof *waterproof
Fashion
Technology
Security
Unique
We will remain the right of modification without prior information
Page 1: ...Access control instruction manual Anti vandal metal surface pickproof waterproof Fashion Technology Security Unique We will remain the right of modification without prior information ...
Page 2: ...re installing position the location where the controller unit is to be mounted operation according to the following steps 1 Open the controller by loosening and removing the back case screw at the bottom using the spline tool 2 Drill the respective holes in the rear cover for flush mount drill the four holes marked B 3 Use the provided drilling template accurately locate and drill the required hol...
Page 3: ...ing Delete user card Enter the setting mode Press the button 2 in the mean time a tone Di will be heard take wo tone Di indicates the success of user card deleting Delete other user cards one by one with a continuous voice Di The 4 tones Di indicates this card has already been deleted After all user cards deleting are completed press the button to return to the setting mode follow the button to re...
Page 4: ...ess the button 3 in the mean time a tone Di will be heard input the building number XXXX and entrance number XX press the button to confirm press the button to return to the setting mode follow the button to return to the standby mode Set the building and entrance Wring diagram Red power DC12 15V Black power GND Brown unlocking button Orange NC Yellow COM Green NO Gray 485 White 485 Red Black Powe...
