15/2
1
When a low battery prompt symbol appears on the display screen, please replace with dedicated
batteries. Battery mounting and replacement should follow Part 3 "Battery mounting and
replacement methods" in "Correct application methods" of the Instructions for Use.
15. Thermometer modes
Comper Smart Infrared Forehead Thermometer has the measurement mode and calibration mode.
The measurement mode is the normal use mode for the user, while the calibration mode is only
available for the manufacturer for production and is not open to the user.
16. Relevant EMC information
Cautions:
●
IR-FT Infrared Forehead Thermometer meets the relevant requirements for electromagnetic
compatibility in IEC60601-1-2;
●
Users should assemble and operate the equipment according to the EMC information provided
in the accompanying documents;
●
Portable and mobile RF communication equipment may affect the performance of IR-FT
Infrared Forehead Thermometer. Therefore during use, the product should be kept away from
electromagnetic interference resources, such as mobile phones and microwave ovens, etc.;
●
See details of guidance and manufacturer's statement in the subsequent
“Guidance and
Manufacturer's Statement”
.
Warnings:
●
IR-FT Infrared Forehead Thermometer shall not be used adjacent to or stacked with other
equipment and if adjacent or stacked use is necessary, it shall be observed to verify normal
operation in the configuration in which it will be used;
●
If the physiological parameters measured by the equipment are lower than the specified
minimum values, the measurement results may be inaccurate.
Table 1: Electromagnetic emission
Guidance and manufacturer's statement - Electromagnetic emission
IR-FT Infrared Forehead Thermometer is intended for use in the electromagnetic environment as
specified below. The buyer or user of IR-FT Infrared Forehead Thermometer should assure that it is
used in such an environment:
Emission test
Compliance
Electromagnetic environment - –Guidance
RF emission
Group 1
IR-FT Infrared Forehead Thermometer uses RF energy