4
How to use
Please follow the steps below to achieve the best measurement results.
1. Remove the forehead probe, open the battery compartment, make sure the poles are in right
direction and install the batteries.
2. Press
“
Power/Measure
”
button to turn the thermometer on.
3. The display shows all segments to complete an internal self-check, then you can start measuring
process after hearing a beep.
4. Measuring forehead temperature:
With the forehead probe attached, point and contact the thermometer at the center of the forehead.
Press and release the ON/ OFF button, read the temperature on the display after a long beep.
Measuring ear temperature:
Gently remove the forehead probe, put a new ear probe cover on the ear probe, fit the probe snugly
into the ear canal, then press the ON/OFF button, read the temperature on the display after a long
beep.
Notes:
1. Remove the forehead probe firstly before open the battery cover and install the battery.
2. Wait 3 seconds and start another measurement after hearing a beep.
3. In the ear mode, if the ear probe is not put on ear probe cover properly,
will flash and it is
unable to take measurements. Make sure the ear probe cover is in place before each ear temperature
measurement.
4. Note on body temperature
⚫
The normal body temperature is a range.
⚫
The normal range varies from person to person and can fluctuate throughout the day.
⚫
The normal range also varies by dody site. Therefore, measurements from different sites should
not be compared directly.
To determine if an individual is experiencing an elevated body temperature and/ or having a fever,