Compass 07 251, Operating Instructions Manual

Page: 8 / 12

E
item 07 251
8
TECHNICAL DATA
Rated voltage 230 V~ / 50 Hz
Nominal power 450 W
Max. torque 300 Nm
Idling speed (n ) 2600 /min
0
Tool holder 1/2" (12,5 mm)
Weight 2,4 kg
Protection class II
Protection mark IP20
Model 07251
Sound pressure level (Lp ) 89 dB(A) / uncertainty K = 3 dB(A)
A
Sound power level (LW ) 100 dB(A) / uncertainty K = 3 dB(A)
A
2 2
Max. vibration emmision (a , ) 10,04 m/s / uncertainty K = 1,5 m/s
h ID
7
3
1
2
8
5
4
6
Please read these operatin instructions carefully before
using the appliance.
Wear safety glasses when using the product.
Use hearing protection while using the product.
Use a protective mask when using product.
Within the EU, this symbol points to the fact that this
product does not belong to household waste.
Electrical waste contains valuable materials that can
be recycled through uncontrolled disposal of waste,
so as not to harm the environment and human health.
Therefore, hand over your electrical and electronic equipment
waste to designated collection points or dispatch the appliance
to the place where you purchased it. Recycling the device is
ensured by the manufacturer.
Car wheel impact wrench
Operating instructions
PRODUCT CHARACTERISTICS
Impact wrench is a common electrical tool of insulation
class II that is designed to loosen and tighten nuts or
bolts. The tool is intended for home use only. You are
not allowed to use it professionally or for gainful employ-
ment. Proper, reliable and safe operation of the tool
depends on proper operation and therefore:
Before putting the device into operation, read the
entire manual and retain it for future reference. The
Supplier is not responsible for damages resulting from
non-compliance with the safety regulations and instructi-
ons in this manual.
ACCESSORIES
The wrench is supplied in a complete state and requires
no further mounting.
1 Extension holder with square 1/2"
2 Trigger R (Rear)
3 Trigger F (Forward)
4 Transmission
5 Engine cover
6 Main handle
7 Power cord
8 Extensions