Compaq WL110, User Manual

Page: 87 / 144

Security 7-5
6. Repeat step 5 for all stations you want to authorize to send/receive data via
this Access Point.
Figure 7-2 Setup Access Control
7. Click the
Save file
button to make a back-up copy of the access control table
file you just created (*.tbl).
You can use this file later to import the configuration into other Access
Points.
8. Click
OK
to return to the Access Control tab.
9. Click
OK
again to save the new configuration to the Access Point and to
return to the main AP Manager window.
10. (Optional) Save the configuration to a local back-up file (*.cnf) as described
in “Step 4 - Create a Back-up of the Configuration” on page4-6.
To save the table to all Access Points, please refer to “Importing an Access
Control Table”
1
.
Importing an Access Control Table
To import an access control table file (*.tbl) to your Access Points:
1. Start the A PManager and connect to the Access Point in the edit mode.
1. Also refer to information on “Common Parameters” on page 8-15.