Compaq TFT500 Flat Panel Monitor
1-11
1.5.5
Rear Enclosure
1. Remove two screws from the rear enclosure.
2. Separate the rear enclosure (spare part no. 296476-001) from the monitor panel using the
Compaq Case Utility tool (Compaq tool kit #100767-001) to loosen the eight snaps (four on top
and two on the sides of the enclosure).
Figure 1-10.
Removing the rear enclosure
To replace the rear enclosure, reverse this procedure.
✎
If you are replacing the antireflective screen only, skip the next few sections and turn to section
1.5.9, Front Bezel Assembly.
