background image

viii   Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure

Compaq Confidential – Need to Know Required

Writer:

 Bob Young  

Project:

 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure  

Comments:

 

Part Number:

 127511-002  

File Name: 

a-frnt.doc  

Last Saved On: 

7/13/00 9:44 AM

In North America, call the Compaq Technical Phone Support Center at
1-800-OK-COMPAQ

1

. This service is available 24 hours a day, 7 days a week.

Outside North America, call the nearest Compaq Technical Support Phone
Center. Telephone numbers for world wide Technical Support Centers are
listed on the Compaq website. Access the Compaq website at

http://www.compaq.com

.

Be sure to have the following information available before you call Compaq:

 

Technical support registration number (if applicable)

 

Product serial number (s)

 

Product model name(s) and numbers(s)

 

Applicable error messages

 

Add-on boards or hardware

 

Third-party hardware or software

 

Operating system type and revision level

 

Detailed, specific questions

Compaq Website

The Compaq website has information on this product as well as the latest
drivers and Flash ROM images. You can access the Compaq website at

http://www.compaq.com

.

Compaq Authorized Reseller

For the name of your nearest Compaq Authorized Reseller:

 

In the United States, call 1-800-345-1518.

 

In Canada, call 1-800-263-5868.

 

Elsewhere, see the Compaq website for locations and telephone
numbers.

                                                          

1

 For continuous quality improvement, calls may be recorded or monitored.

Summary of Contents for STORAGEWORKS TL881



















Reviews: