manualshive.com logo in svg

Compaq presario V6000, Maintenance And Service Manual

Share
Download
Compaq presario V6000 Maintenance And Service Manual Download Page 171

Removal and Replacement Procedures

Maintenance and Service Guide

5–63

✎

The thermal pads and thermal paste should be thoroughly 
cleaned from the surfaces of the fan/heat sink assembly 

1

, 

2

, 

and 

3

, the system board components 

4

 and 

6

, and the 

processor 

5

 each time the fan/heat sink assembly is removed. 

Thermal pads and thermal paste should be installed on all 
surfaces before the fan/heat sink assembly is reinstalled. 
Thermal pads and thermal paste are included with all fan/heat 
sink assembly, system board, and processor spare part kits.

Thermal Pad and Thermal Paste Locations

Reverse the above procedure to install the fan/heat sink assembly.

Summary of Contents for presario V6000

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands