Compaq Presario V3500 - Notebook PC Maintenance And Service Manual Download Page 84

Page: 84 / 175

Remove the display switch module

(2)

. The display switch module is included in the Display Hinge

Kit, spare part number 417103-001 for computers with Intel processors, 455822-001 for computers

with AMD processors.

If it is necessary to replace the display panel, remove the display panel from the display enclosure.

The display panel is available using the spare part number 448602-001 for computers with Intel

processors, 455810-001 for computers with AMD processors.

If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips

PM2.5×4.0 screw

(1)

that secures each transceiver to the display enclosure.

Remove the wireless antenna cables from the clips

(2)

built into the display enclosure.

Detach the wireless antenna transceivers

(3)

from the display enclosure.

76 Chapter

Removal and replacement procedures

Summary of Contents for Presario V3500 - Notebook PC
















































































































































































Search results

Summary of Contents for Presario V3500 - Notebook PC

Reviews:

Brands by name

Popular brands

Compaq Presario V3500 - Notebook PC, Maintenance And Service Manual

Search results

Summary of Contents for Presario V3500 - Notebook PC

Reviews:

Brands by name

Popular brands