manualshive.com logo in svg

Compaq Presario R3000 - Notebook PC, Hardware Manual

Share
Download
Compaq Presario R3000 - Notebook PC Hardware Manual Download Page 84

Modem and Network Connections

Hardware Guide

7–7

To connect to a LAN:

1. Check that the existing LAN supports Ethernet 

10BASE-T/100BASE-TX connections.

2. Plug the purchased network cable into the notebook 

RJ-45 jack 

1

. 

3. Plug the other end into the LAN network jack 

2

.

4. Windows automatically detects and sets up a LAN 

connection. To edit settings, open Network Connections in 
Control Panel.

Two lights on the RJ-45 jack indicate the connection status 

3

:

■

The yellow light indicates network activity.

■

The green light indicates that a link is present.

Connecting an RJ-45 network cable

See Windows Help for information about setting up and using 
LAN connections. Select Start > Help and Support. Contact your 
network administrator for network information.

Summary of Contents for Presario R3000 - Notebook PC



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands