Compaq Presario 5BW Series, Maintenance And Service Manual, Page: 55 / 236

United States
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance and Service Guide
Compaq Presario Internet PC Series Computers
Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Service
Considerations
Preparation
for
Disassembly
Serial Number
Side Access
Panel
Memory
Module
Expansion
Card
REMOVAL & REPLACEMENT
Service Considerations
Tool Requirements
Phillips screwdriver
■
Needle-nose pliers
■
Flathead screwdriver
■
Compaq Utilities software
■
Screws
The screws used in these products are not interchangeable. If an incorrect screw is used during the
reassembly process, it could cause damage to the unit. Compaq strongly recommends that all screws
removed during the disassembly process be kept with the part that was removed, then returned to
their proper locations.
IMPORTANT: As each subassembly is removed from the computer, it should
be placed away from the work area to prevent damage.
Cables and Connectors
Most cables used throughout the unit are ribbon cables . These must be handled with extreme care to
avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal
from the connector. Handle cables by the connector whenever possible. In all cases, avoid bending,