manualshive.com logo in svg

Compaq Presario 5000 Series, Maintenance And Service Manual

Share
Download
Compaq Presario 5000 Series Maintenance And Service Manual Download Page 112

United States    

Compaq Presario Internet PC 5000 Series Computers

REMOVAL AND REPLACEMENT PROCEDURES

PRODUCT DESCRIPTION

TROUBLESHOOTING

ILLUSTRATED PARTS CATALOG

REMOVAL AND REPLACEMENT PROCEDURES

JUMPER AND SWITCH INFORMATION

SPECIFICATIONS

ELECTROSTATIC

DISCHARGE

SERVICE

CONSIDERATIONS

PREPARATION FOR

DISASSEMBLY

SERIAL NUMBER

SIDE ACCESS PANEL

GRAPHICS CARD

EXPANSION CARD

(Modem or Network

Card)

1394 CARD

MEMORY MODULE

HARD DRIVE

DISK DRIVE

REMOVING THE TOP

DOOR

REMOVING THE CD

STORAGE DOOR

(Lower Front Panel -

Open the CD Storage

Door)

Replacing the Microprocessor/Heatsink Assembly, Continued

 

Replacement

Remove and discard the plastic film on the bottom of the new

thermal pad.

3.  

Place the new thermal pad (plastic pad side up) onto the heatsink in

the same position as the old thermal pad.

4.  

With the round portion of the screwdriver handle, rub the top of the

new thermal pad to ensure that the entire pad sticks to the

heatsink.

5.  

Carefully remove and discard the plastic tab on top of the new

thermal pad.

6.  

Next Step

WARNING

If the new thermal pad is not applied properly, the

microprocessor/heatsink assembly will not work properly, and you risk

damaging the system board.

Summary of Contents for Presario 5000 Series

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands