Firmware Update Instructions
DO NOT ABORT!
AlphaBIOS
Updating to V5.68-0... ........ Verifying V5.68-0...
PASSED.
UPD> up srm*
WARNING: updates may take several minutes to complete for each device.
Confirm update on: srmflash
[Y/(N)] y
DO NOT ABORT!
srmflash
Updating to V5.4-1... .......... Verifying V5.4-1...
PASSED.
UPD> exit
Initializing...
A sample session is provided below of an update of SRM console from V5.3-
1 to V5.4-1 and AlphaBIOS V5.67-0 to AlphaBIOS V5.68-0. The update
method, in this example, is a BOOT command of a MOP file located in the
local MOM$LOAD directory.
P00>>>b ewb0 -fi as4x00_v5_4 -fl 0,0
(boot ewb0.0.0.5.0 -file as4x00_v5_4 -flags 0,0)
Trying MOP boot.
..............................................
Network load complete.
Host name: XXXXXX
Host address: xx-xx-xx-xx-xx-xx
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 2b7000
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
012345
677789
P01>>>START 6000
P01>>>
P02>>>START 6000
P02>>>
9876543210
starting console on CPU 0
sizing memory
0
2048 MB EDO
starting console on CPU 1
starting console on CPU 2
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - PCI-PCI Bridge
probing PCI-PCI Bridge, bus 2
bus 2 slot 0 - QLogic ISP1020
bus 0 slot 3 - DECchip 21140-AA
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
bus 0 slot 2 - S3 Trio64/Trio32
bus 0 slot 5 - DECchip 21041-AA
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
isp0, hose 1, bus 2, slot 0
tulip0, hose 1, bus 0, slot 3
floppy0, hose 0, bus 1, slot 0
tulip1, hose 0, bus 0, slot 5
System temperature is 28 degrees C
2–8
