http://h18000.www1.hp.com/athome/support/msgs/2000/headph.html
United States December 10, 2002
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
|
|
|
|
Removal and Replacement
Removing the Headphone Board
Disassembly
Sequence
Headphone
Board
Processor
Removing the Headphone Board
NOTE:
The
headphone
board is
only
available
on
Presario
2410 ES
and 4240
ES
models.
Perform the
preparation
procedures.
Move the air
baffle out of the
way.
Remove the
drive cage from
the chassis.
5.
Disconnect the
headphone
board from the
system board.
6.
Remove the
two screws that
hold the
headphone
board onto the
chassis, and lift
the headphone
board off othe
front of the
chassis.
End of sequence.
To replace the
headphone
board, reverse
this procedure.
privacy statement
legal notices
http://h18000.www1.hp.com/athome/support/msgs/2000/headph.html [12/10/2002 9:01:53 AM]