Compaq.com - Compaq Presario 1660 Model Maintenance and Service Guide
To run Computer Setup:
Go to the Compaq Utilities menu and select the Computer Setup option. Follow the on-screen instructions to
complete your chosen task.
Computer Checkup (TEST)
Computer Checkup (TEST) determines whether the various computer components and devices are
recognized by the system and are functioning properly. You can display, print, or save the
information generated by Computer Checkup.
Follow these steps to run Computer Checkup:
1. Plug the computer into an external power source. (A low battery condition could interrupt the
program.)
2. Turn on the external devices that you want to test. Connect the printer if you want to print a log of
error messages.
3. Insert the Compaq Diagnostics diskette in drive A.
4. Turn on or restart the computer. The computer starts from drive A, and the
Diagnostics
Welcome
screen appears.
5. Press
Enter
to continue. The
Diagnostics
menu appears.
6. Select Computer Checkup from the
Diagnostics
menu. A
Test Option
menu appears.
7. Select
View the Device List
from the
Test Option
menu. A list of the installed Compaq devices
appears.
8. If the list of installed devices is correct, select
OK
. The
Test Option
menu appears.
NOTE:
If the list is incorrect, ensure
that any new devices are
installed properly.
9. Select one of the following from the
Test Option
menu:
■
Quick Check Diagnostics.
Runs a quick, general test on each device with a minimal number of
prompts. If errors occur, they display when the testing is complete. You cannot print or save
the error messages.
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20che...d%20ok/NOTEBOOKS/PRESARIO%201660/cpqdiag.html (2 of 4)6/27/2004 3:00:33 AM
