Compaq FTAM Responder Diagnostic Messages
OSI/FTAM Responder Manual — 425199-001
A- 4
Protocol and Supporting Service-Related Diagnostic
Messages
Recovery.
The application or FTAM user should retry the operation. This can be a
transient condition. If the condition persists, the Compaq problem solver can start
another FTAM responder process to balance the load across multiple responder
processes. For details on how to configure and start additional responders, refer to the
SCF Reference Manual
for FTAM
and APLMGR
and the
OSI/FTAM Configuration and
Management Manual
.
11
Cause.
A file has been selected with requested access that violates the file system
security. A file-system security violation (48) was detected.
Effect.
The responder rejects the select or create request and generates a security-fail
event (event number 21).
Recovery.
The application or FTAM user can either retry with the correct select-request
or create-request parameters, or use initiator-ID and filestore-password values that
support the requested access; or the Compaq problem solver can change the local
Compaq security for the file.
Protocol and Supporting Service-Related Diagnostic
Messages
Table A-4 displays the diagnostic error identifiers caused by protocol errors or improper
requests for supporting services.
Access request violates local security
Table A-4. Protocol and Supporting Service-Related Diagnostic Messages
Identifier
Type
Observer
Source
Reason
1001
2
4
2
Unsupported parameter values
1002
2
4
2
Mandatory parameter not set
1007
2
4
2
Unspecific FTAM protocol error
1009
2
4
2
FTAM protocol error, functional
unit error
1011
2
4
3
Lower-layer failure
1015
2
4
2
Illegal grouping sequence
1016
2
4
2
Grouping threshold violation
1017
2
4
2
Specific PDU request
inconsistent with current
requested access
