manualshive.com logo in svg

Compaq nw9440 - Mobile Workstation, Manual

Share
Download
Compaq nw9440 - Mobile Workstation Manual Download Page 7

Power

2–1

2

Power sources

The computer can run on internal or external AC power. The 
following table indicates the best power source for common 
tasks.

✎

Older AC adapters will not work with this computer.

Task

Recommended power source

Work in most software 
applications

■

Charged battery pack in the computer

■

External power supplied through one of 
the following devices:

❐

AC adapter included with the computer

❐

Optional docking device

❐

Optional power adapter

Charge or calibrate a battery 
pack in the computer

External power supplied through

■

AC adapter included with the computer

■

Optional docking device

■

Optional power adapter

Å

Do not charge the computer battery pack 
on board aircraft. 

Install or modify system 
software or write to a CD 
or DVD

External power supplied through

■

AC adapter included with the computer

■

Optional docking device

■

Optional power adapter

Summary of Contents for nw9440 - Mobile Workstation



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands