7-6
Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide Comments:
Part Number: AA-RKPDA-TE 173941-001 File Name: H-CH7 BOOT BIOS.DOC Last Saved On: 12/8/99 11:04 AM
3.
Press the
F5
key immediately when the message appears to go to the
Emulex BIOS Utility.
NOTE:
Press the
F5
key within five seconds of the displayed message to invoke the Boot
BIOS utility.
The Main menu screen appears showing a list of HBAs.
Host Bus Adapter BIOS Utility
Host Bus Adapters in the System:
1. ALPA: 18
PCI BUS #: 00
PCI DEVICE #: 10
2. ALPA: 01
PCI BUS #: 00
PCI DEVICE #: 0E
Enter a selection.
Enter <x> to Exit.
4.
Select the HBA by entering the appropriate number.
Any fibre channel drive attached to the HBA can be designated as the
boot device.
Adapter 1: ALPA: 18
PCI BUS#: 00
PCI DEVICE #: 10
1. Configure legacy private loop.
2. Configure boot devices.
3. Enable or disable BIOS on the adapter.
4. Change default ALPA of this device.
5. Changed Extended Link Service Timer (+ Advanced ).
6. Change FC Link Timer (+ Advanced ).
7. Change PLOGI Retry Timer (+ Advanced ).
8. Topology Selections (+ Advanced ).
Enter a Selection:
Enter <x> to Exit
<F6> to Default Values
<PageUp> to previous menu
5.
Type
8
to select a Topology Selection. Enter
a selection and then press
the
PageUp
key.
6.
Type
2
to select Configure Boot Devices:
a.
Select a boot entry
b.
Enter a selection
c.
Select the desired boot device. Enter
a selection and then press the
PageUp
key.
