In the list of installed network
components on the
Configuration tab, double-click
TCP/IP
. If more than one
TCP/IP entry is listed, select the
entry for the network adapter
you will use to connect to the
Connection Point CP-2E. The
TCP/IP Properties window is
displayed.
(Please refer to the User Guide for information on setting up
Windows 2000 and NT 4.0 clients.)
From the taskbar, select
Start > Settings > Control Panel
. Double-
click the
Network
icon. The Network window is displayed.
3b
3b
Click the
IP Address
tab. Click the
Obtain
an IP address automatically
radio button.
Click
OK
. The Network window is
displayed again. Click
OK
. Restart the PC
to complete the process.
Note:
You must restart your PC
before continuing, even if you are
not prompted to reboot.
PC Client Setup
Windows 98 and ME Setup
Choose “Install Firmware Update Utility” and follow the wizard instructions.
This utility will be used for emergency system recovery.
Choose Product Registration. Register your Connection Point for complete prod-
uct support.
Congratulations! Your Connection Point is installed and functioning. It is pro-
viding firewall protection to your home or small office network as you share
Internet access, files, printers, music, images and play head-to-head games.
Please consult the User Guide to bring additional clients onto your network.
For Connection Point support see the trouble shooting portion of the User
Guide or visit www.compaq.com/support/files.
Finish Installation
Connection Point Setup
Access CP-2E
Bring up your computer's web browser, such as Microsoft
Internet Explorer or Netscape Communicator. Type
cp.home
in
the address area and press enter. You may also type in
192.168.1.1
, which is the base address of CP-2E. The Quick
Setup Wizard will begin.
Click the Refresh button on your web
browser to verify that Internet
Connection reads
Connected
(in green
print). Proceed to Step 5 if you are
connected. If not, click the
Help/Troubleshooting
icon on the
Home Page, or see MAC Spoofing in
Chapter 5 of the
iPAQ Connection Point
CP-2E User Guide.
Note:
When accessing the
management icons, the login screen
is displayed. Please enter the same
Username and Password you
entered during the quick setup
process and click OK.
Follow the directions presented
in the Quick Setup Wizard. Click
OK
when the Completed screen
is displayed. CP-2E will automati-
cally reboot and the
Home Page
will be displayed.
iPAQ
Connection Point CP-2E
Getting Started Guide
Simplify Your Life,
Connect Your World
287446-001
© 2002 Compaq Information Technologies Group, L.P. Compaq, the Compaq logo, iPAQ,
and Connection Point are trademarks of Compaq Information Technologies Group, L.P.
in the U.S. and/or other countries. Microsoft and Windows are trademarks of Microsoft
Corporation in the U.S. and/or other countries. All other product names mentioned
herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions contained
herein. The information is provided "as is" without warranty of any kind and is subject
to change without notice. The warranties for Compaq products are set forth in the
express limited warranty statements accompanying such products. Nothing herein
should be construed as constituting an additional warranty.
Load CD into CD-ROM.
287446-001QSU Paladin.qxd 4/17/2002 3:50 PM Page 2
