background image

Computer Setup (F10) Utility Guide

www.hp.com

1

Computer Setup (F10) Utility

Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:

Change factory default settings.

Set the system date and time.

Set, view, change, or verify the system configuration, including 
settings for processor, graphics, memory, audio, storage, 
communications, and input devices.

Modify the boot order of bootable devices such as hard drives, 
diskette drives, optical drives, or USB flash media devices.

Enable or disable Quick Power-On Self Test, which is faster than 
a full boot but does not run all of the diagnostic tests run during a 
full boot.

Enter the Asset Tag or property identification number assigned by 
the company to this computer.

Establish a supervisor password that controls access to Computer 
Setup (F10) Utility and the settings described in this section.

To secure integrated I/O functionality, including the serial, USB, 
or parallel ports, audio, or embedded NIC, so that they cannot be 
used until they are unsecured.

Enable or disable removable media boot ability.

Enable or disable legacy diskette write ability (when supported by 
hardware).

Summary of Contents for dx2700 - Microtower PC



















Reviews: