manualshive.com logo in svg

Compaq BL20p - ProLiant - G2, Maintenance And Service Manual, Page: 3 / 61

Share
Download
Compaq BL20p - ProLiant - G2 Maintenance And Service Manual Download Page 3

Compaq ProLiant BL20p Server Blade Maintenance and Service Guide 

iii 

  

 

COMPAQ CONFIDENTIAL

 Codename: AvalancheX Part Number: 316080-001 Last Saved On: 12/18/02 11:27 AM 

 

 

Contents 

About This Guide

 

Symbols in Text.......................................................................................................................................... vii

 

Important Safety Information ..................................................................................................................... vii

 

Compaq Technician Notes ......................................................................................................................... vii

 

Where to Go for Additional Help .............................................................................................................. viii

 

Integrated Management Log ..................................................................................................................ix

 

Telephone Numbers ...............................................................................................................................ix

 

Text Conventions .........................................................................................................................................ix

 

Chapter 1 

Illustrated Parts Catalog

 

ProLiant BL20p Server Blade Components .............................................................................................. 1-2

 

Server Blade Exploded View.............................................................................................................. 1-2

 

Server Blade Spare Parts List ............................................................................................................. 1-3

 

Chapter 2 

Removal and Replacement Procedures

 

Safety Considerations................................................................................................................................ 2-1

 

Electrostatic Discharge Information ................................................................................................... 2-1

 

Server Blade Warnings and Cautions ................................................................................................. 2-1

 

Rack Warnings and Cautions.............................................................................................................. 2-2

 

Symbols on Equipment ....................................................................................................................... 2-3

 

Server Blade Components ......................................................................................................................... 2-4

 

Server Blade Preparation .................................................................................................................... 2-4

 

Access Panel ....................................................................................................................................... 2-6

 

Hard Drive Blanks .............................................................................................................................. 2-7

 

Hot-Plug SCSI Hard Drives................................................................................................................ 2-8

 

DIMMs................................................................................................................................................ 2-9

 

Processor Power Module .................................................................................................................. 2-10

 

Processor Assembly .......................................................................................................................... 2-11

 

Battery-Backed Write Cache Enabler ............................................................................................... 2-12

 

Blower Assembly.............................................................................................................................. 2-13

 

Compaq Smart Array 5i Controller Module ..................................................................................... 2-14

 

NIC Modules..................................................................................................................................... 2-15

 

SCSI Backplane ................................................................................................................................ 2-16

 

Power Button/LED Board................................................................................................................. 2-17

 

Battery............................................................................................................................................... 2-18

 

System Board .................................................................................................................................... 2-21

 

Server Blade Blanks.......................................................................................................................... 2-23

 

Summary of Contents for BL20p - ProLiant - G2






























































Reviews:

No comments