Setting Up the System
Modifying the System Contact Information
To modify the system contact information using the Web-based user interface:
1.
Click the
Enclosure
tab.
2.
Click
SNMP
Configuration
in the left panel.
3.
Set the cursor in the
System Contact
field and type the appropriate information.
4.
Click
Apply
.
To modify the system contact information using the CLI, enter:
SET SNMP CONTACT <contact>
The <contact> field must be 0-20 characters long and supports all the alphanumeric
characters, the underscore, the dash, and spaces with quotes.
Adding Trap Targets
To add a trap target using the Web-based user interface:
1.
Click the
Enclosure
tab.
2.
Click
SNMP Configuration
in the left panel.
3.
Type the IP address in the appropriate field of the
SNMP
area.
4.
Click
Add
.
5.
Click
Apply
.
To add a trap target using the CLI, enter:
ADD SNMP TRAPRECEIVER <IP address>
The <IP address> must be in the form ###.###.###.###, where ### ranges from 0 to
255.
The Integrated Administrator only supports v1 traps and directs the traps to SNMP
port 162 by default. A maximum of eight IP addresses can be added to receive SNMP
traps.
5-28
HP ProLiant BL e-Class Integrated Administrator User Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-004 Last Saved On: 6/16/03 9:30 AM
