manualshive.com logo in svg

Compaq 5500R - ProLiant - 256 MB RAM, Setup And Installation Manual, Page: 40 / 169

Share
Download
Compaq 5500R - ProLiant - 256 MB RAM Setup And Installation Manual Download Page 40

3-8

    

Rack-Mount Server Installation

For use with Pentium II Xeon and Pentium III Xeon processor-based servers only

Writer: Michele Wray   Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide   Comments: 328470-002

File Name: D-CH03.DOC   Last Saved On: 2/8/99 10:49 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

■ 

Slotted screwdriver

■ 

Application software diskettes, such as SmartStart and Support Software
CD

■ 

Options to be installed, such as

❏ 

Optional monitor, keyboard, etc.

❏ 

Integrated Management Display (tower model only)

❏ 

Array Controller

❏ 

Redundant fans

Preparing the Mounting Brackets
and Slide Rail Assemblies

Each pair of mounting brackets, with attached slide rail assemblies supports one
rack-mountable server.

Figure 3-2.     Rack mounting brackets; alignment tabs identify the front flanges

Each slide rail assembly consists of an outer bracket rail and an inner server rail
(see the following figure). These pieces can be separated; the bracket rails
attach to the rack mounting brackets (shown in the previous figure), and the
server rails attach to the sides of the server chassis.

Summary of Contents for 5500R - ProLiant - 256 MB RAM










































































































































































Reviews:

No comments