MP1600 Microportable Projector
1-27
Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM
Part Number:383706-001 File name: BkCh1.doc
Cleaning the Lens
To minimize the risk of damaging the coating or scratching the
lens surface, this cleaning procedure has been developed. The
first recommendation is to remove any dust particles from the
lens by blowing them off with clean, dry, deionized air. However,
this may not be a convenient method, and an alternate method is
described below using the cloth included with the projector.
To clean the lens, use only the clean cloth that was included with
the projector and follow these steps:
CAUTION:
Do not spray any type of fluid or cleaner
directly on the lens surface. Do not use liquid cleaners on
the cloth as this may contaminate the cloth.
1. Wipe the lens in a single direction with the clean, dry cloth.
Do not wipe back and forth across the lens surface.
2. If the cloth is dirty or smears the lens, wash the cloth. If the
cloth is still dirty after washing it or the fabric is damaged,
replace it.
✎
Do not use fabric softener when washing the cloth or softener
sheets when drying the cloth.
CAUTION:
Do not store the cloth in contact with the lens
for a long time as doing so may contaminate the lens with
dye from the cloth. Keep the cloth in its case when it is not
being used. The cloth can be contaminated if left in the
open air or in a lab coat pocket.
