3
4.
Slide the actuator latch
for the tape library onto the bottom of the vertical rod.
5.
Replace the vertical rod’s bottom mounting bracket and install the screws removed in step 2 but do not tighten
them.
6.
Position the stabilizer bracket
¢ so that the bottom hole in the stabilizer bracket is aligned with the 12th hole of
the installation area and the top hole in the stabilizer bracket is aligned with the 15th hole of the installation area
on the right rear cabinet rail.
7.
Place the nut bar
behind the right rear cabinet rail and install and tighten the two 10-32 truss-head screws
provided to secure the stabilizer bracket
¢.
8.
Position the actuator latch
to properly engage the interlock actuator, and tighten the two 6-32 set screws to
secure the actuator latch to the vertical rod.
9.
Now tighten the screws to secure the vertical rod’s bottom mounting bracket.
Figure 1 Installing the 2T-QINTL-TL Interlock Kit
9
2
8
7
7
6
5
4
3
3
2
10
1
1
4
3
3
6
6
6
6
7
7
7
7
8
9
10
5
5
5
5
4
4
4
4
3
3
3
3
3
2
2
1
1
LJ-06688
