![Compaq 2T-QINTL-TL Installation Information Download Page 1](http://html1.mh-extra.com/html/compaq/2t-qintl-tl/2t-qintl-tl_installation-information_2646476001.webp)
© Compaq Computer Corporation. 1999. All Rights Reserved.
®
Compaq and the Compaq logo are registered in the United States Patent and Trademark Office.
RM Tape Library Interlock Kit Installation Information
EK-TPLBR-IN. A01
May 1999
Introduction
The 2T-QINTL-TL interlock kit contains the components for installing the slide assemblies, the interlock system,
and the shipping bracket on the rackmounted tape library. The interlock system helps prevent cabinet instability by
allowing only one system at a time to be pulled out of the cabinet. The shipping bracket is used to secure the tape
library in the cabinet during shipment or when moving the cabinet to a new location.
The interlock system consists of a vertical rod, on which are mounted actuator latches for each product installed in
the cabinet. These actuator latches engage the interlock actuator on the rear of rackmount systems. When a
rackmount system is pulled out of the cabinet, the actuator latches rotate to prevent any other rackmount system that
has an interlock actuator from being pulled out of the cabinet.
Table 1 lists the parts that are shipped with the 2T-QINTL-TL interlock kit. The callouts in column 1 refer to the
part location in Figure 1.
Table 1 2T-QINTL-TL Interlock Kit Parts List
Callout
Description
Part Number
Qty.
Slide bracket, right and left front
12-44537-01
2
Slide bracket, right and left rear
12-44537-02
2
8-32 pan-head screw
90-06038-01
8
Flat washer, .190ID x .051THK
90-06660-00
8
Split washer, .171ID
90-06690-00
8
8-32 hex nut
90-06561-00
8
M6 nut bar
74-53977-02
4
Interlock actuator
74-60570-01
1
¡
6-32 truss-head screw
90-00063-15
2
¢
Stabilizer bracket
74-48996-01
1
Actuator latch
74-48997-02
1
10-32 threaded nut bar
74-48998-01
1
10-32 truss-head screw
90-00063-39
2
6-32 truss-head screw
90-00063-10
2
Shipping bracket
74-60569-01
1
8-32 truss-head screw
90-00063-22
2
Flat washer, .221ID x .051THK
90-06664-00
2
8-32 Kep nut
90-06563-00
2
Flat washer, .286ID x .066THK
90-06676-00
2
Split washer, .263ID
90-07797-00
2
1
M6 screw
90-40005-16
2
2
Cage nut
90-11476-01
2
RM Tape Library Interlock Kit Installation Information
EK-TPLBR-IN
1